Tsx536

Hey Guys,

I was a test car for the first Gen TSX Supercharger and I was just talking to one of my old contacts from CT-Engineering. They told me they are working on a Supercharger kit for the 2009 TSX.

They are still fabricating the kit and but are apparently pretty far along. The current plan is to use a Hondata reflash for the engine management. Apparently, Honda changed the ECU in 09. This kit is for the 09 TSX only. They did not say anything about the 07-08 TSX. (Sorry 07-08 guys)

They are suppose to have pics when the kit is farther along. I will let you guys know if I hear any new news or see any pics.

shmork53

i wonder how the supercharged I4 will do compared to the V6? This could be very interesting...

Tsx536

The V6 is going to make more torque, that's just how it goes with 2 more cyclinders and a large displacement motor. If you take a SC Kit and up the boost though, I think it would give a the V6 a run for it's money. It probably just comes down to preference. Also, I heard the V6 will only come in auto.

Anyone know how much more is the V6 TSX suppose to cost than the I4 TSX?

2G Type-S

How much will it run? I hope they keep the V6 price in mind. However, I like the 6-spd so very excited regardless....

ttk5

cool

DerwoodEE

I'm guessing here, but probably slightly under a base TL.

kowloonsniperhk

Guess I have to start saving money. Or save up for the reflash.

LuvMyTSX

Hey there, Kenny. Thanks for the info.

godfather2

tell them to copy the mugen s/c and bring it to market already!

j/k this is good news

HeavyDuty

Their s/c systems are the most beautifully engineered and constructed totally complete kits with *no* compromises you've ever seen.

I'm down.

MMC Racing

In my opinion, this kit needs to make 60+hp and be under $5000 for me to consider it.

HeavyDuty

Judging by the previous costs and output for 06 MT models, looks like ~ 50 whp increase and $4395.00 retail.

http://www.ct-engineering.com/store/product1547.html

Luchin

What other costs can one expect when installing a SC. ECU reflash etc.

HeavyDuty

The CTE (formerly Comptech USA) kits were complete as anything you've ever seen. They fit right the first time, work as advertised and the instructions are better than anything on the market.

You don't *need* anything, but just like any power adder, other mods like exhaust & intake, etc will help overall.

Luchin

Too bad about the fact that an exhaust would help. Which makes sense. In the past I have found it very difficult to find an exhaust that isn't childish in sound. Give me an exhaust that will sound like a factory 350Z or G35/37 coupe and I'll buy it. Otherwise....I seem to be SOL. The only exhaust I've ever had that I've been happy with sound wise was the RSR I had on my 97 Prelude.

I test drove a Speed3 for fun and the tone at 60mph was a pain. If I had been interested the sound of the exhaust alone would have been enough to make me walk away from the car.

ZildJonKim

well it looks like you're SOL because there is no way to get a 4 banger to sound like a VQ35. But yes, i love that sound.

HeavyDuty

I acknowledge I carry a torch for CTE or Comptech, but it's for good reason. Even their exhaust is understated, but works for all around gains, not just peak power and they don't sound like a kazoo.

V6's sound good, so do V8's, V10's sound like a$$ to me (primarily the Viper) my R33 sounds like a frickin' Evinrude. It's hard to make a 4 *not* sound raspy.

Luchin

What I meant by 350Z/G35 was that I would not want my car to sound any louder then that. RSR did a very good job with the exhaust they produced for the 97 Prelude.

HeavyDuty

Oh, you're talking volume, not tone, gotcha. Didn't RSR pull out of the states?

AznX TL

i cant wait, im assuming this will fit the accord k24z3 also.

Luchin

Yes I think they did. Besides which they don't make an exhaust for this Gen TSX. I suppose I am talking about volume. I hate an exhaust that has a lot of back pressure 'sound' when cruising or lifting off the gas.

Excelerate

iTrader: (1)

As more info becomes available on this we will post it up. CT may even give us some drawings.

soon4tsx

What about smog... I don't think mods of this type are CA legal?
Damn, sounds like a sweet mod though.

CarbonGray Earl

If its comptech/CT-engineering, its usually smog legal. They have supercharger for a couple of cars now, and I don't remember any not being smog-legal unless they are exclusively race parts (race header, etc).

CT-engineering is in Cali, if that count for anything.

mg7726

very nice. i'd take this over the V6 TSX any day...

BOOSTED09TSX

I believe that the supercharged version will have at least the same amount of power or more than the V6 if that is the case it will be a better rounded car. IMO

HeavyDuty

With a boost upgrade pulley & appropriate management, it'll be *just right*.

(Not that I know anything about boost upgrade pulleys and their effect on warranties, etc.) Heh...

mucter

Adding forced induction in the first place.... I'd think that'd be the larger warranty issue.

CarbonGray Earl

If it were not a warranty issue, this would be the choice for enthusiasts.

Power + 6MT > v6 5AT, IMO.

BOOSTED09TSX

Yeah warranty sucks, I have heard of dealers being very laid back on performance products if they install them. The the power figures on the supercharger should be out in the next 30 days.

Type-S RPh

How do you know?

HeavyDuty

I didn't make myself clear. I meant the warranty from Comp...er CTE on the S/C kit. The boost upgrade pulley has voided their warranty in the past.

Tsx536

Hey guys,

I talked with CT-E a couple of days back. They said mechanical fitment of the kit should be done by the end of the month.

And my Acura dealer has actually been great about my warranty even though I have a SC. Some Acura dealerships seem to be good when you have Comptech / CT-E parts. Some of them even sell the CT-E parts. CT-E was actually Honda's performance company in the past. They made parts for a lot of Honda's race cars.

Tsx536

It will void your warranty because it is spinning the blower faster than their base kit does. With the RSX guys, I've heard they have been very good about still honoring warranties even with smaller pulleys.

HeavyDuty

Yeah, they have been awesome in that regard, I just didn't want to broadcast that.

BOOSTED09TSX

I have been waiting for quite some time to start talking about this. I finally got the ok to do so. My car has been at CT-Engineering since Dec 08. I work for a company that is one of their largest distributors. We have also sent them a 09 TL-SHAWD. I will have pictures of the installed supercharger next week. Power figures towards the end of May. And my car back the first week in June. It will have the following CT parts on it

springs
sway bar
short shifter
supercharger
exhaust
carbon grille
ice box

Luchin

I'm assuming all of these parts will be for sale. Can you tell us what the drop on the spirngs is?

BOOSTED09TSX

The springs will lower the car approx 1 inch all the way around. The ice box should be available in the next couple of weeks.

godfather2

Woot

kristy7911

ooh ooh! i want an icebox! anybody know if we can pre-order them? Any idea on price?